Menu

Discussion Forum

New Discussion
查找

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Sommerfeld radiation condition in COMSOL

Posted 2018年3月28日 GMT-4 22:55 Acoustics & Vibrations Version 5.3 1 Reply

Minsik Seo
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi, I've been trying to compare approximated Sommerfeld radiation condition and perfectly matched layer in COMSOL with "Pressure Acoustics, Frequency Domain" Physics. So I implemented Sommerfeld radiation condition by using "Impedance" node.

I know the Sommerfeld radiation condition has the form of

And it can be approximated as

on

Since the equation for "Impedance" node in Pressure Acoustics physics is like,

Therefore, letting I can implement the "Sommerfeld radiation condition"

In the result, however, the radiation condition is applied when the sign of the impedance is opposite. That is, .

Why this happened? Is the Sommerfeld radiation condition defined differently in COMSOL?

1 Reply Last Post 2018年3月29日 GMT-4 04:52
Elin Svensson COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 7 years ago 2018年3月29日 GMT-4 04:52

Hi,

The Sommerfeld radiation condition depends on the definition of the Fourier transform which determines how a time-harmonic wave varies with time. COMSOL uses . Then you need replace with in the first equation. See, for example, Wikipedia, where this is discussed.

Kind regards, Elin

Hi, The Sommerfeld radiation condition depends on the definition of the Fourier transform which determines how a time-harmonic wave varies with time. COMSOL uses p(\mathbf{x}, t) = p(\mathbf{x})e^{i\omega t}. Then you need replace -i with +i in the first equation. See, for example, [Wikipedia](https://en.wikipedia.org/wiki/Sommerfeld_radiation_condition), where this is discussed. Kind regards, Elin

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content