Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Moving Mesh questions
Posted 2011年5月12日 GMT-4 14:49 Modeling Tools & Definitions, Parameters, Variables, & Functions Version 4.1 1 Reply
Please login with a confirmed email address before reporting spam
In the setting interface, Moving Mesh (ale) --- Prescribed Mesh Displacement, there are two items called Prescribed x displacement and Prescribed y displacement. My question is what's the difference between check or uncheck the corresponding boxes before these two items, for example, when should I check the dx box, and when uncheck ?
Thank you!
Thank you!
1 Reply Last Post 2011年5月12日 GMT-4 16:12
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
if I read you right, unchecked imeans "free" to move anywhere, checked means restiricted to default "0" or whatever =0 in the field you have entered
--
Good luck
Ivar
if I read you right, unchecked imeans "free" to move anywhere, checked means restiricted to default "0" or whatever =0 in the field you have entered
--
Good luck
Ivar