Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
getting x,y-coordinate data
Posted 2011年5月30日 GMT-4 08:08 2 Replies
Please login with a confirmed email address before reporting spam
Hi,
In comsol 4.1 I am doing a time-dependent (PDE) study about the evaluation of dipole vortex. Now it is of interest to follow the trajectory of the dipole. Therefore I want the data of the x,y-position of the maximum and minimum vorticity of the dipole, to plot the trajectory eventually. To get those maxima and minima in the domain I selected the maximum and minimum option under Model Builder>Definitions>Model Couplings.
Although the program works with x and y coordinates, I cannot find a option in comsol to get those x,y data of the maxima and minima (at different times).
Is it possible to get x, y data of the maxima and minima?
Thanks in advance.
J. van Houwelingen
In comsol 4.1 I am doing a time-dependent (PDE) study about the evaluation of dipole vortex. Now it is of interest to follow the trajectory of the dipole. Therefore I want the data of the x,y-position of the maximum and minimum vorticity of the dipole, to plot the trajectory eventually. To get those maxima and minima in the domain I selected the maximum and minimum option under Model Builder>Definitions>Model Couplings.
Although the program works with x and y coordinates, I cannot find a option in comsol to get those x,y data of the maxima and minima (at different times).
Is it possible to get x, y data of the maxima and minima?
Thanks in advance.
J. van Houwelingen
2 Replies Last Post 2011年5月31日 GMT-4 06:16
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
yes indeed, the min() and max() have a second parameter call possibility (you need 2-3 calls one for each coordinate" check the FORUM with a search it's here somewhere. It's also in the help but slightly "hidden"
something like maxX = min(T,x) but I cannot remember 100% pls check
--
Good luck
Ivar
yes indeed, the min() and max() have a second parameter call possibility (you need 2-3 calls one for each coordinate" check the FORUM with a search it's here somewhere. It's also in the help but slightly "hidden"
something like maxX = min(T,x) but I cannot remember 100% pls check
--
Good luck
Ivar
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
I've found how to do it.
If you want the x-position of a maximum (omega in my case) you have to use the following expression in a plot:
max(omega, x)
for the y-position it is:
max(omega, y)
Thanks a lot.
Josje
If you want the x-position of a maximum (omega in my case) you have to use the following expression in a plot:
max(omega, x)
for the y-position it is:
max(omega, y)
Thanks a lot.
Josje