Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Remeshing of FE model from simpleware

Posted 2011年6月18日 GMT-4 09:14 Mesh Version 4.2 2 Replies

Dohyun Kim
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello.
I made FE model in simpleware. and it was imported to Comsol.
but i have no idea how to consist mesh again.
if you know the method please let me know
thank you.
2 Replies Last Post 2014年11月11日 GMT-5 06:15
Joel Kpahou
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2011年7月12日 GMT-4 03:34
Hello.
i have the same problem.
Thanks
Hello. i have the same problem. Thanks
Simpleware
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2014年11月11日 GMT-5 06:15
Although this is an old thread now, if people do have questions about meshes created in Simpleware for COMSOL, please contact info@simpleware.com with your particular issue. You can also find more information about the features of our software at www.simpleware.com.

Gareth
Simpleware Ltd.
Although this is an old thread now, if people do have questions about meshes created in Simpleware for COMSOL, please contact info@simpleware.com with your particular issue. You can also find more information about the features of our software at www.simpleware.com. Gareth Simpleware Ltd.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content