Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Reactions in the Transport of Concentrated Species Interface
Posted 2011年6月21日 GMT-4 03:51 Modeling Tools & Definitions, Parameters, Variables, & Functions Version 4.1 0 Replies
Please login with a confirmed email address before reporting spam
I want to build an axisymmetric 1-D model of an adsorber regarding three species. Therefore, I'm coupling Darcy's Law with the Transport of Concentrated Species.
My problem is, that I can only embed reactions for two species though the third species adsorbs as well. Regarding species 1 and 2 is necessary as these two have to be fully removed from the third one (w_3=0.99 Ma-%). But due to its high mass fraction the variation of the mass flow of the third species must not be neglected as it affects the pressure drop inside the adsorber during the adsorption and the regeneration phase. Do you know, how I can include another reaction term for the third species?
Best regards,
Martin
Hello Akos Tota
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.