Discussion Forum

Forum Home

New Discussion

Note: This discussion is about an older version of the COMSOL Multiphysics^® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Out-Of-Memory Error in my simulation

Posted 2011年6月30日 GMT-4 13:03 MEMS & Nanotechnology, MEMS & Piezoelectric Devices Version 4.0a 3 Replies

Mohamed Aref

Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi, I'am Mohamed Aref and model cMUT and after each simulation of my model this error occur
So what is the solution of this error ?

Attachments:

3 Replies Last Post 2011年7月1日 GMT-4 07:17

Mohamed Aref

Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago

See the attached files, please

Yoann Many

Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago

Your mesh generates to many elements and you don't have enough memory to run the calculations on all of them, so the solver stops. You either need a computer with more ram, or you need to coarse your mesh, and even switch to a 2D resolution if you can

Mohamed Aref

Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago

thank you very much

Note that while COMSOL employees may participate in the discussion forum, COMSOL^® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Discussion Forum

Out-Of-Memory Error in my simulation

Suggested Content