Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Transfer a diffusion flux in a solid electrode to an porous electrode
Posted 2018年9月5日 GMT-4 09:30 Chemical, Battery Design, Parameters, Variables, & Functions Version 5.3a 0 Replies
Please login with a confirmed email address before reporting spam
Hello all together,
I have a Problem, which maybe have been discussed several times in a way here, but not for this special case.
I am simulating a 3D model of an anode in a battery.
The 3D model particles are surrounded with binder which contains active material to connect the anode particles with the conductor and also simulate the porosity around the particles in the electrolyte. The binder is modeled as a porous electrode.
Is it possible to connect in a solid the transport of diluted species module(cs=Lithium-concentration) with the diffusion module of a porous electrode(lithium-ion-battery module)? So that I have a Lithium-flux out of an solid electrode into a porous electrode where it is transported further?
And how ?
So that the lithium-diffusion of the solid electrode is connected to the porous electrode which surrounds it. Of course the other way round as well.
Thanks, Greetings Daniel
Hello Daniel Schanbacher
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.