Menu

Discussion Forum

New Discussion
查找

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

3D model with PCM

Posted 2018年9月10日 GMT-4 00:17 2 Replies

Jnana Bhaskar Rao
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

my model is not showing the phase change what are the reasons for this?

2 Replies Last Post 2018年10月16日 GMT-4 06:36
Mickaël Barsive COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 6 years ago 2018年9月10日 GMT-4 05:32

Hello,

The phase change is not automatically include in heat transfer interface.

You can use the two following approachs to define Phase Change:

1/ Use the "Phase change" feature like this model: https://www.comsol.fr/model/cooling-and-solidification-of-metal-12701

2/ Use ALE features like this model: https://www.comsol.fr/model/tin-melting-front-6234

I hope this helps.

Mickaël

Hello, The phase change is not automatically include in heat transfer interface. You can use the two following approachs to define Phase Change: 1/ Use the "Phase change" feature like this model: https://www.comsol.fr/model/cooling-and-solidification-of-metal-12701 2/ Use ALE features like this model: https://www.comsol.fr/model/tin-melting-front-6234 I hope this helps. Mickaël
Jnana Bhaskar Rao
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 6 years ago 2018年10月16日 GMT-4 06:36

thanks for suggestion i will try

thanks for suggestion i will try

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content