Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Hydrogen and Air mixing in a room
Posted 2011年7月18日 GMT-4 02:15 Computational Fluid Dynamics (CFD) Version 4.1 3 Replies
Please login with a confirmed email address before reporting spam
I'm new to Comsol and have some problem.
I have a room with 2 Inlets, on oen inlet air enters and on other there is hydrogen
The two gases mix in the room and there is one outlet
Required results:
Concentration of the hydrogen gas within the room
The mixing should be approachable by convection and diffusion.
my problem is to connect the certain gass with respective inlets
i define two material now how can i assign the hydrogen and air to their respective inlets
regards
Ansar Ali
Please login with a confirmed email address before reporting spam
file is attached
at boundry 3 for air and i want to use boundry 7 for hydrogen how can i do this?
Attachments:
Please login with a confirmed email address before reporting spam
You have to add convection/diffusion eqn. see attached.
Regards
Naveed
Attachments:
Please login with a confirmed email address before reporting spam
sir little more help i am using comsol 4.1 and your editted file is not
being opened here
please save it as comsol 4.1
it is highly apprciated if u provide help with elaboration
regards
ANSAR ALI