Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Setting of time dependent study for cyclic voltammetry
Posted 2018年10月1日 GMT-4 23:33 Chemical, Chemical Reaction Engineering, Electrochemistry Version 5.3a 3 Replies
Please login with a confirmed email address before reporting spam
Dear all,
I want to define a time dependent study for cyclic voltammetry under the Transport of Diluted Species Interface. But I cannot find the way to define the parameter of scan rate. It seems the TDS interface don't provide a boundary of electrode surface with scan rate. Could anyone help me with the problem? Thank you very much.
Best, Chi
Please login with a confirmed email address before reporting spam
I did this 4 years ago, wish this helps.
Lasse
Attachments:
Please login with a confirmed email address before reporting spam
I did this 4 years ago, wish this helps.
Lasse
Hi Lasse,
Thank you for your help. I also found your glucose oxidation example.
As I want to simulate the CV of EDL, I donot want to include electrode reactions. So I introduced the electrostatic interface to define a stern layer. And I defined a scan signal (E1) according to your method at the electrostatic interface. But I didnot get the correct CV curves for EDL. And if I defined a periodic scan signal (E2), the errors occured. Are there anything wrong with my settings? And my mph file is attached. Thank you!
Best, Chi
Attachments:
Please login with a confirmed email address before reporting spam
EDL relaxes so fast that - in my opinion - what you need to do is to calculate the electrode capacitance at various potentials (i.e. surface charge). Current during CV is then scan rate*capacitance.