Menu

Discussion Forum

New Discussion
查找

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Electromagnetic force on a current carrying wire

Posted 2018年10月25日 GMT-4 04:46 Electromagnetics, Electromagnetic Heating, Low-Frequency Electromagnetics 2 Replies

Aswin P
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

A varying current (square wave or antyng) passing through a wire. A metalic strip has kept so cose to it. wire connected to cathode and metal to anode. Metal sheelt is fixed and wire is flexible. Can the magnetic force acting on the wire due to eddycurrents in sheet is possible? (comsol 5.3)

Or in general how can we simulate the magnetic field generated around a current carying wire, and how can we simulate magnetic forces. Thanks in advance

2 Replies Last Post 2018年10月26日 GMT-4 14:37
Nirmal Paudel Tribhuvan University/Electrical Engineering
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 6 years ago 2018年10月25日 GMT-4 13:58

Hi Aswin,

The following models might be helpful here: 1. https://www.comsol.com/model/electromagnetic-forces-on-parallel-current-carrying-wires-131

  1. https://www.comsol.com/model/magnet-falling-through-copper-tube-13875

BR/Nirmal

Hi Aswin, The following models might be helpful here: 1. https://www.comsol.com/model/electromagnetic-forces-on-parallel-current-carrying-wires-131 2. https://www.comsol.com/model/magnet-falling-through-copper-tube-13875 BR/Nirmal
Aswin P
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 6 years ago 2018年10月26日 GMT-4 14:37

Hi Nirmal,

Thanks a lot for the reply, Will try

Hi Nirmal, Thanks a lot for the reply, Will try

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content