Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
subdomain setting of PDE, Coefficient form for two variables
Posted 2011年8月5日 GMT-4 14:45 Version 3.5a 0 Replies
Please login with a confirmed email address before reporting spam
I wonder if you can help me with the setting of the PDE, Coefficient form for 2 variable please; as I search in your document for Comsol's book but it wasn't help enough; most of the information was for the setting for one variable, and I need to set it for 2 variable.
My questions are mainly about the subdomain setting of PDE, Coefficient form for two variables (please note that i am using Comsol 3.5a):
1- For the setting of diffusion coefficient (c) we can see that there are two rectangular to fill under each variable, may I know what these rectangular stand for. Are they for x and y direction for each variable?
2- For the convection coefficient (beta) we have also two rectangular to fill under each variable; in each of them there is two zeros that could be filled with value or expression; may I know what these two rectangular represent and what are the two zero stand for please.
3- For the Conservative flux source term (gamma), there are four rectangular to be fill, and the name of the variable is not shows, may I know what these 4 rectangular stand for please.
Hello Rihab Jaralla
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.