Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Defining mass flow rate at inlets in CFD model

Posted 2011年8月24日 GMT-4 04:43 Fluid & Heat, Computational Fluid Dynamics (CFD) Version 4.2 0 Replies

Birgit Palm
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Dear all,

I have a CFD model with three circular openings for burners, that are together defined as one inlet. I enter the mass flow rate - does this value deal with all three openings? Does it mean, at each opening 1/3rd of the mass flow rate is defined as boundary condition?

I would say yes, because in the User Guide I found that: "This option sets the integrated mass flow across the entire boundary to a specific value."

I just want to make sure that I calculate with the correct value. Thanks already,

Birgit
0 Replies Last Post 2011年8月24日 GMT-4 04:43
COMSOL Moderator

Hello Birgit Palm

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content