Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
µ-Metal shield
Posted 2011年9月12日 GMT-4 14:58 Version 4.1 5 Replies
Please login with a confirmed email address before reporting spam
i have an Inventor file with a µ-Metal shield i have designed. Now i want to simulate how good the shielding is. Is it enough ne apply a magnetic field (as a boundary condition) and to set the the magnetic permeability of the metall?
Thank you
Please login with a confirmed email address before reporting spam
if the fields get the material near saturation you might need to define a non-linear permeability.
Cheers
Edgar
Please login with a confirmed email address before reporting spam
i will try it.
Vladimir
Please login with a confirmed email address before reporting spam
first i designed i mini setup. A big cube and a small metall part with high permiability inside. Now i want to see how the magnetic field in cube change if i apply a constant magnetic field.
But this is my Problem. how to define a constant magnetic field in the big cube, that i will be influenced by the high permiability? I i set the magnitic field in the whole volume then nothing will happen?
With best regards
Please login with a confirmed email address before reporting spam
set the uniform field you want just on the outer boundaries (cube walls) this will result in a uniform field inside the cube and any magnetic object inside the cube will distort it. E.g. for a uniform field of 1T in z-direction set Bz=1T and Bx=0, By =0 on all outer boundaries.
Cheers
Edgar
Please login with a confirmed email address before reporting spam
I got it :)