Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Plotting Variables and Surfaces
Posted 2011年9月22日 GMT-4 14:57 1 Reply
Please login with a confirmed email address before reporting spam
I solved a model that consists of a tube with a perforation. The default output from COMSOL is to plot the velocity magnitude. I would prefer to plot the flow rate. How do I go about doing this? Also is there any way to select a surface to plot from the existing geometry? Ultimately, I want to determine the flow rate from the perforation and would like to select only that surface.
1 Reply Last Post 2011年9月22日 GMT-4 17:33
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi,
Off the top of my head I would define a variable as the surface integral of velocity (=flow rate) and then create a surface in the data set selecting the face you need, then you may create a 2D plot on the newly created surface-data set and under it you may create a surface plot selecting the above mentioned variable.
Cheers
Off the top of my head I would define a variable as the surface integral of velocity (=flow rate) and then create a surface in the data set selecting the face you need, then you may create a 2D plot on the newly created surface-data set and under it you may create a surface plot selecting the above mentioned variable.
Cheers