Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Resonance of a piezo device

Posted 2011年9月30日 GMT-4 00:23 MEMS & Nanotechnology, MEMS & Piezoelectric Devices, Results & Visualization, Structural Mechanics Version 4.2 1 Reply

Kamala McNaul
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello,

I am working on verifying the mode shape of a piezoelectric resonator operating around 1GHz. By applying the appropriate boundary conditions and using the frequency domain study to sweep the frequency, I can almost exactly match the frequency found during lab experiments.

I have two questions, though.

I tried plotting the admittance, but it appears to be zero no matter what frequencies I sweep. However, if I plot the susceptance (the imaginary part of the admittance), I can clearly see the peak at resonance. Do you know why this might be?

Also, what I would like to do is verify the out-of-plane displacements at resonance. So, I try plotting a 1D line plot along the part I'm interested in. I should be getting something in the 200-300 picometer range, but what I get is a line the wiggles and loops in a way that is physically impossible. Is there anything you can tell me about how COMSOL calculates mode shapes, or displacements - is it possible the a round off error is happening somewhere, or is there a bug somewhere? I've tried everything to fix it.

Thanks,
Kamala
1 Reply Last Post 2011年12月7日 GMT-5 20:02
COMSOL Moderator

Hello Kamala McNaul

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Ye Ai
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2011年12月7日 GMT-5 20:02
Hi Kamala,

If you do not turn on the damping of the piezoelectric resonator, the conductance (real part of the admittance) is always zero.

Best
Ye
Hi Kamala, If you do not turn on the damping of the piezoelectric resonator, the conductance (real part of the admittance) is always zero. Best Ye

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content