Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

I want to update boundary condition as variable in matlab

Posted 2011年10月1日 GMT-4 04:24 Version 4.2 7 Replies

siamak b
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi, I am solving inverse heat problem . I am using comsol to solve, and matlab to calculate the new boundary condition. I want to update the boundary condition with new one in every 'for' cycle. I used the help inside the comsol but it gives me error i cant use it.
7 Replies Last Post 2011年10月3日 GMT-4 01:45
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2011年10月1日 GMT-4 05:01
Hi

why cant you use COMSOl for everything ? thta is what the math part of COMSOL is all about, no ? solving means square optimisation problems

Add a general equation dependent on your variable to be optimised define possibly a weak condition too, ensure initial conditins are OK and if possible a derivative and off you go

--
Good luck
Ivar
Hi why cant you use COMSOl for everything ? thta is what the math part of COMSOL is all about, no ? solving means square optimisation problems Add a general equation dependent on your variable to be optimised define possibly a weak condition too, ensure initial conditins are OK and if possible a derivative and off you go -- Good luck Ivar
siamak b
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2011年10月1日 GMT-4 11:08
thank you Ivar it seems that you are right . thanks for your time very much
Best regard
Siamak B
thank you Ivar it seems that you are right . thanks for your time very much Best regard Siamak B
siamak b
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2011年10月1日 GMT-4 13:10
Hi again
I countered a problem during my modeling how I will include experimental data to comsol.
thanks for your time
Hi again I countered a problem during my modeling how I will include experimental data to comsol. thanks for your time
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2011年10月2日 GMT-4 09:54
Hi

experimental data can be entered as a "Definition Function", either with an interpolation or a piecewise function, the former has a derivative that helps the solver to not to get stuck on the steps

--
Good luck
Ivar
Hi experimental data can be entered as a "Definition Function", either with an interpolation or a piecewise function, the former has a derivative that helps the solver to not to get stuck on the steps -- Good luck Ivar
siamak b
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2011年10月2日 GMT-4 14:02
I thank you very much for what you are doing you are life saver I am working on it. But as matter of curiosity . Is there a way to update boundary condition as matlab variable in a 'for' loop. The boundary condition is like 'p*sin t '
which 'p' up to dates in a loop it will be fun to compare to results.
thanks
I thank you very much for what you are doing you are life saver I am working on it. But as matter of curiosity . Is there a way to update boundary condition as matlab variable in a 'for' loop. The boundary condition is like 'p*sin t ' which 'p' up to dates in a loop it will be fun to compare to results. thanks
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2011年10月2日 GMT-4 17:01
Hi

normally your boundary conditions can also be driven by equations, so long i's mathematically correct without circular loops

--
Good luck
Ivar
Hi normally your boundary conditions can also be driven by equations, so long i's mathematically correct without circular loops -- Good luck Ivar
siamak b
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2011年10月3日 GMT-4 01:45
I appreciate your answer again however I want to define P as a variable that changes during each loop when I'm doing that it gives me error.
thank you
I appreciate your answer again however I want to define P as a variable that changes during each loop when I'm doing that it gives me error. thank you

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content