Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Plot of an AC voltage
Posted 2019年2月27日 GMT-5 04:57 Electromagnetics, Low-Frequency Electromagnetics, Results & Visualization Version 5.4 0 Replies
Please login with a confirmed email address before reporting spam
Hi all,
I am quite new in Comsol and Im an currently working on a 2 electrode conductivity sensor. An AC voltage of 50 mV rms has to be applied on both electrodes, so without a ground. I tried this with the physics electric currents (ec) together with electrical circuit (cir) in the study frequency domain. In the ec study, I defiend a ground node, voltage source of AC and two external I VS U nodes which are connected with the two electrodes through terminals.
Now, I think I have a AC voltage but I have no idea how I can check if this really an AC voltage. How can I see if I have applied an AC voltage?
Hello Pien Vinke
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.