Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Heat transfer in a fibrous structure exposed to a heat source
Posted 2019年3月12日 GMT-4 07:02 Heat Transfer & Phase Change, Chemical Reaction Engineering, Equation-Based Modeling 1 Reply
Please login with a confirmed email address before reporting spam
A fibrous structure exposed to a heat source is a multi-physics problem. Heat transfer within the structure happens in all three modes: conduction, convection, and radiation. The conduction happens along the longitudinal direction of fibers and also in the transverse direction between the fibers that are in contact with each other. Due to the heating, the chemically bound in-fiber or infra-fiber organic material undergo chemical reactions and triggers gas dynamics within the structures leading to convection of heat. Similarly, due to the temperature difference between the fibers, the radioactive heat transfer is triggered. Furthermore, the chemical reaction of the organic content is exothermic and behaves like an internal heat source for the heat-diffusion problem. The thermal, chemical and fluid dynamics problem need to be solved simultaneously as a coupled problem in order to accurately predict the temperature field.
Can comsol solve such problem ?
Attachments:
Hello Deepak Paudel
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.
Please login with a confirmed email address before reporting spam
COMSOL is essentially a solver for differential equations, with a nice interface for it. If your problem can be cast as a (set of) differential equation(s), then it's likely COMSOL can do it.
As for your particular problem, all the physics you mention correspond to well-known PDE that COMSOL is meant to be used for. COMSOL even has specific modules to make your particular usecases more convenient, though these may not be necessary to you.