Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

defining variables in 4.1

Please login with a confirmed email address before reporting spam

hi,
i am doing a time dependent problem in comsol4. in this i need to define some variables which should not change with time but i want to define another factor for the variables. basically i want to see the results by varying some of the parameters at multiple values.
i am not able to do this. can you help me in it?
-hemant

1 Reply Last Post 2011年11月18日 GMT-5 15:41
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2011年11月18日 GMT-5 15:41
Hi

are you referring to a parametric sweep or a "continuation" sweep, i.e. you define a variable as V0*Param and you get the solver to scal Param from 0 to 1 ?
If so check the two keywords agains the doc. I'm not ure how to loop this with a time series, probably you need an external parametrical sweep over one or several time solver series

--
Good luck
Ivar
Hi are you referring to a parametric sweep or a "continuation" sweep, i.e. you define a variable as V0*Param and you get the solver to scal Param from 0 to 1 ? If so check the two keywords agains the doc. I'm not ure how to loop this with a time series, probably you need an external parametrical sweep over one or several time solver series -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.