Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
defining variables in 4.1
Posted 2011年11月18日 GMT-5 13:21 Version 4.0 1 Reply
Please login with a confirmed email address before reporting spam
hi,
i am doing a time dependent problem in comsol4. in this i need to define some variables which should not change with time but i want to define another factor for the variables. basically i want to see the results by varying some of the parameters at multiple values.
i am not able to do this. can you help me in it?
-hemant
i am doing a time dependent problem in comsol4. in this i need to define some variables which should not change with time but i want to define another factor for the variables. basically i want to see the results by varying some of the parameters at multiple values.
i am not able to do this. can you help me in it?
-hemant
1 Reply Last Post 2011年11月18日 GMT-5 15:41
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
are you referring to a parametric sweep or a "continuation" sweep, i.e. you define a variable as V0*Param and you get the solver to scal Param from 0 to 1 ?
If so check the two keywords agains the doc. I'm not ure how to loop this with a time series, probably you need an external parametrical sweep over one or several time solver series
--
Good luck
Ivar
are you referring to a parametric sweep or a "continuation" sweep, i.e. you define a variable as V0*Param and you get the solver to scal Param from 0 to 1 ?
If so check the two keywords agains the doc. I'm not ure how to loop this with a time series, probably you need an external parametrical sweep over one or several time solver series
--
Good luck
Ivar