Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

charged particle deposition

Posted 2011年12月5日 GMT-5 16:18 Low-Frequency Electromagnetics, Charged Particle Tracing, Fluid & Heat, Particle Tracing for Fluid Flow Version 4.3a 1 Reply

Kamdem Nounamo
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi all,

i'm trying to model (3D) an electrodeposition of nanoparticles under laminar conditions (fluid flow), but i've no idea....which module i should use. I'm using the comsol version 4.2a.

any idea to help me out, will be very thankful

kamdem
1 Reply Last Post 2013年4月16日 GMT-4 13:08
COMSOL Moderator

Hello Kamdem Nounamo

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

brockap3
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2013年4月16日 GMT-4 13:08
Did you ever find anything out about this? I am currently looking at using charged particle tracing where the charged particles are in a laminar flow under the influence of an oscillating magnetic field... So, i understand your problem. My particles will either see the fluid flow or the magnetics, but struggle to see both effects. Thanks in advance if you've found anything new.
Did you ever find anything out about this? I am currently looking at using charged particle tracing where the charged particles are in a laminar flow under the influence of an oscillating magnetic field... So, i understand your problem. My particles will either see the fluid flow or the magnetics, but struggle to see both effects. Thanks in advance if you've found anything new.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content