Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Creating antisymmetric/symmetric boundary

Posted 2011年12月10日 GMT-5 14:02 Version 4.2a 1 Reply

Arijit Banerjee
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi,

I am trying to create a simple model of a magnet. I wanted to do a 1 pole model and by antisymmetric boundary condition create the full model. Can you please let me know the steps. I am attaching the model. The centre line is the one across which the model should be antisymmetric.

Thanks
Arijit

Attachments:

1 Reply Last Post 2011年12月10日 GMT-5 22:34
Arijit Banerjee
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2011年12月10日 GMT-5 22:34
I was able to do it.

Arijit
I was able to do it. Arijit

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content