Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
solving multiphysics problems
Posted 2011年12月19日 GMT-5 08:21 Fluid & Heat, Heat Transfer & Phase Change Version 4.2 1 Reply
Please login with a confirmed email address before reporting spam
sir,
i am trying to solve a multiphysics problem which includes heat transfer and fluid flow . but when i solve all my equations together ,the solution is not converging. so i tried to solve sequentially. but i do not know how to link each solution to other module.for example after solving for heat transfer i cannot use that solution to compute velocities in laminar flow module.
please help......,
i am trying to solve a multiphysics problem which includes heat transfer and fluid flow . but when i solve all my equations together ,the solution is not converging. so i tried to solve sequentially. but i do not know how to link each solution to other module.for example after solving for heat transfer i cannot use that solution to compute velocities in laminar flow module.
please help......,
1 Reply Last Post 2011年12月20日 GMT-5 03:17
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
have you checked the "Conjugate Heat Flow" section of them physics and the related doc ? be aware that coupling these two physics is tricky, and require careful tweaking (= reasonable knowledge of expected results to define "good" initial values)
--
Good luck
Ivar
have you checked the "Conjugate Heat Flow" section of them physics and the related doc ? be aware that coupling these two physics is tricky, and require careful tweaking (= reasonable knowledge of expected results to define "good" initial values)
--
Good luck
Ivar