Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

hwo to set up contact resistance with different ACDC physics?

Posted 2011年12月21日 GMT-5 11:45 Low-Frequency Electromagnetics, Modeling Tools & Definitions, Parameters, Variables, & Functions Version 4.2a 0 Replies

accelerate
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam



could you help me with a modle of metal-semiconductor interface contact resistance and bounary condition?

usually, in COMSOL, the contact impedance is defined in one physical case which is usually ACDC-> electric current. But for semiconductor device, when I want to involve the contact resistance which is important for all those high current device, the two part metal and semiconductor is described by different physics model, metal shuold be electric current, semiconductor should be electrostatics and diluted species transport.
in this case, the contact resistance happened at the interface of two or three different physics case. is there any way to model this with COMSOL ?

thanks
0 Replies Last Post 2011年12月21日 GMT-5 11:45
COMSOL Moderator

Hello accelerate

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content