Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

The difference in Boundary Conditions

Posted 2011年12月28日 GMT-5 12:32 Chemical Reaction Engineering, Modeling Tools & Definitions, Parameters, Variables, & Functions Version 4.2a 1 Reply

Yoav Green
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi,
I have noticed that when I use the prepared modules for example -Transport of Diluted Species (TDS)and Electrostatics
Each module has numerous possibilities for boundary conditions which appear to be the same.
For example TDS has the No Flux condition which looks exactly the same as the Symmetry condition.
In Electrostatics, the No Flux condition appears to be the same as taking the surface charge density with a value of zero.

While I understand the physical difference between such BC, I would like to know whether or nor Comsol treats each of these BC differently when solving and etc'. Is it preferable to solving using one instead of the other under certain circumstances? If so- when?
Are these conditions here just to make it easier for us to produce models with BC that have a physical meaning compared to just using mathematical BC.

Thanks in advance.,
Yoav
1 Reply Last Post 2012年4月20日 GMT-4 08:04
COMSOL Moderator

Hello Yoav Green

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Patricio Davila
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2012年4月20日 GMT-4 08:04
I'm also wondering about this. In my current model I got basically the same results when applying the symmetry BC as when I applied the No Flux BC. I'm using the TDS interface and can't seem to notice any difference.

--
Patricio Davila
I'm also wondering about this. In my current model I got basically the same results when applying the symmetry BC as when I applied the No Flux BC. I'm using the TDS interface and can't seem to notice any difference. -- Patricio Davila

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content