Menu

Discussion Forum

New Discussion
查找

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Help me. I have an exam on 27 of February (NMR)

Posted 2020年2月14日 GMT-5 04:21 Electromagnetic Heating, Low-Frequency Electromagnetics, Optimization Version 5.3 1 Reply

Emanuele D'angelo
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I have to carry out a 2D axial-symmetric project that represents the phenomenon of nuclear magnetic resonance; I wanted to ask if any of you had a model already made or something to take a cue from; Our goal is to obtain a uniform magnetic field and to perform an optimization that allows me to check that the field value on the (z) axis is homogeneous; Sincerely, I sincerely hope for your help !!

1 Reply Last Post 2020年2月14日 GMT-5 09:52
Walter Frei COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 5 years ago 2020年2月14日 GMT-5 09:52

Yes, and example of optimizing coil spacing is here: https://www.comsol.com/blogs/how-to-optimize-the-spacing-of-electromagnetic-coils/ and optimizing coil currents: https://www.comsol.com/blogs/3-ways-to-optimize-the-current-in-electromagnetic-coils/

Best of Success!

Yes, and example of optimizing coil spacing is here: https://www.comsol.com/blogs/how-to-optimize-the-spacing-of-electromagnetic-coils/ and optimizing coil currents: https://www.comsol.com/blogs/3-ways-to-optimize-the-current-in-electromagnetic-coils/ Best of Success!

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content