Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Help for insulated glass

Please login with a confirmed email address before reporting spam

hello

im trying to simulate simple insulated glass in 3D (glass-air-glass (closed by any silicon)), but i cant get any results.

could you please give me any advise what i have to pay attention?

1 Reply Last Post 2012年1月19日 GMT-5 00:59
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2012年1月19日 GMT-5 00:59
Hi

FSI models are tricky, they are complex multiphysics and need careful understanding and tweaking, so the best is to repeat several times the different library models until you really understand the different "buttons" you can use: mesh density, material property ranges, time step ranges ...

--
Good luck
Ivar
Hi FSI models are tricky, they are complex multiphysics and need careful understanding and tweaking, so the best is to repeat several times the different library models until you really understand the different "buttons" you can use: mesh density, material property ranges, time step ranges ... -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.