Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
switch boundary conditions in a model
Posted 2020年4月9日 GMT-4 14:08 Fluid & Heat, Parameters, Variables, & Functions Version 5.5 2 Replies
Please login with a confirmed email address before reporting spam
Hello, dear users. I have a problem with Switching the boundary conditions. There is a chamber with two inlets and one outlet, and I want to simulate a single-phase time-dependent fluid in the chamber. In a time interval (0,t1), fluid enters the chamber through inlet one, and in (t1,t2) fluid enters through inlet 2. how can I switch the inlets in the transient solution. I have attached a schematic photo. Thank you
Attachments:
Please login with a confirmed email address before reporting spam
Well, you should be able to specify time-dependent functions as user-defined boundary conditions in your time-dependent problem. For example, define the functions of time you need under Component --> definitions --> functions and then enter those functions where you would specify your inlet BCs. Have you already tried that?
-------------------Scientific Applications & Research Associates (SARA) Inc.
www.comsol.com/partners-consultants/certified-consultants/sara
Please login with a confirmed email address before reporting spam
Well, you should be able to specify time-dependent functions as user-defined boundary conditions in your time-dependent problem. For example, define the functions of time you need under Component --> definitions --> functions and then enter those functions where you would specify your inlet BCs. Have you already tried that?
thank you for your help, I'll try it.