Menu

Discussion Forum

New Discussion
查找

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Tet vs quad Mesh?

Posted 2020年4月26日 GMT-4 06:14 Mesh Version 5.5 2 Replies

Andreas
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I use the free tetrahedral meshing as it is the default. I read a comsol blog post basically saying that tetrahedral meshing is superior in enabling comsol to find a suitable mesh. I can't however find any specific reasons for using tetrahedral instead of ie free quad and therefore have a hard time explaining my mesh setup from an engineering standpoint.

Thank you in advance

2 Replies Last Post 2020年4月30日 GMT-4 02:28
Andreas
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 5 years ago 2020年4月29日 GMT-4 15:03
Updated: 5 years ago 2020年4月30日 GMT-4 02:24

that's the article i was referring to.

https://www.comsol.de/blogs/meshing-your-geometry-various-element-types

that's the article i was referring to.
Henrik Sönnerlind COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 5 years ago 2020年4月30日 GMT-4 02:28

Hi,

The free quad mesh is a 2D mesh on boundaries, whereas the free tetrahedral mesh is a 3D volume mesh, so they cannot really be compared.

-------------------
Henrik Sönnerlind
COMSOL
Hi, The free quad mesh is a 2D mesh on boundaries, whereas the free tetrahedral mesh is a 3D volume mesh, so they cannot really be compared.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content