Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
How to add initial conditions of discrete form to partial differential equations
Posted 2020年6月28日 GMT-4 22:36 Studies & Solvers, Structural Mechanics, Equation-Based Modeling Version 5.5 0 Replies
Please login with a confirmed email address before reporting spam
I use the partial differential equation solution module in comsol to solve the dynamic model of flexible cables.
a, b, c, d are constant coefficients
The initial conditions required for the flexible cable dynamic model include the initial geometry of the cable, but if the initial geometry cannot be described by the function, and the initial condition can be obtained by measuring the spatial coordinates of some discrete points. How to add such initial conditions to partial differential equations.
In addition, if the boundary condition is a mixed boundary condition, for example, the masses are connected to the two end points of the cable,
how should it be added in comsol?
Hello Jack Red
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.