Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Finding the maximum temperature on a surface
Posted 2012年2月24日 GMT-5 10:46 Heat Transfer & Phase Change Version 4.2 1 Reply
Please login with a confirmed email address before reporting spam
Hi,
Suppose that I have a temperature distribution on a surface after computing using different boundary and initial conditions. How do we determine the maximum and minimum temperature on the surface(i.e to find the exact location and exact temperature value)?
Suppose that I have a temperature distribution on a surface after computing using different boundary and initial conditions. How do we determine the maximum and minimum temperature on the surface(i.e to find the exact location and exact temperature value)?
1 Reply Last Post 2012年2月24日 GMT-5 14:58
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
one way is to search the Forum, it has been discussed a couple of times, on the plots you have a right click more min-max plot you might add
then you have the min max operators, and the less known Definitions coupling operators min1(T,x) to get the x, respectively y,z,r location of the maximum of T over the selected domain or boundary or whatever
see the doc too ;)
--
Good luck
Ivar
one way is to search the Forum, it has been discussed a couple of times, on the plots you have a right click more min-max plot you might add
then you have the min max operators, and the less known Definitions coupling operators min1(T,x) to get the x, respectively y,z,r location of the maximum of T over the selected domain or boundary or whatever
see the doc too ;)
--
Good luck
Ivar