Menu

Discussion Forum

New Discussion
查找

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Shorted coil in comsol

Posted 2020年7月4日 GMT-4 10:16 1 Reply

Shilpa George
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I am using comol 5.5. Can you please help me to create a shorted coil of 10 turns in comsol with current 1A.

I tried the helix. but i cannot short the ends.

1 Reply Last Post 2020年7月4日 GMT-4 14:32
Edgar J. Kaiser Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 4 years ago 2020年7月4日 GMT-4 14:32

Hi,

I don't see how it would be physically possible to short a coil and maintain a current under stationary conditions. You can apply a 1A current excitation to the coil. If you want a short you can apply a 0V voltage excitation.

Cheers Edgar

-------------------
Edgar J. Kaiser
emPhys Physical Technology
www.emphys.com
Hi, I don't see how it would be physically possible to short a coil and maintain a current under stationary conditions. You can apply a 1A current excitation to the coil. If you want a short you can apply a 0V voltage excitation. Cheers Edgar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content