Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Axis difinition didn't work. How to obtain my desirable view?
Posted 2012年2月27日 GMT-5 17:58 Battery Design Version 4.2 0 Replies
Please login with a confirmed email address before reporting spam
In the Model 1->Definitions->View 1->Axis.
I input
x minimum: -0.005
x maximum: 0.055
y minimum: 1e-4
y maximum: 2e-4
I chose the Lock axis, and applied.
But it didn't work. The axis in the Graphics page was not what I defined.
Hello Junxiang Shi
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.