Menu

Discussion Forum

New Discussion
查找

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Axial stress on both sides of plate

Posted 2020年9月29日 GMT-4 01:20 Structural & Acoustics, Geomechanics, Structural Mechanics 2 Replies

Rana Raza Mehdi
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi, I am solving problem for tensile stress in plate in which natural frequency changes by applying stress along x-axis on both sides of plate.

I am giving floquet periodicity on both sides of x-axis and giving boundary loads on both sides of x-axis in terms of total force. When I compute eigenfrequency analysis it gives me error.

If I fix 1 side of plate for constraints then problem changes because I want stress on both sides. Suggest me how to how to solve such kind of problem. Thanks.

2 Replies Last Post 2020年10月5日 GMT-4 01:36
T Y
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 4 years ago 2020年9月29日 GMT-4 05:21

Dear Raza,

From my understanding, you want a prestressed eigenfrequency solution, this is a stationary solver followed by an eigenfrequency solver. It is inbuilt in COMSOL.

If you give boundary loads on both sides of the plate using a force, this will solve in the stationary study then input into the eigenfrequency solver. What are your boundary conditions? A plate 2 sides fixed and other 2 have the force applied to them? From your query it is hard to understand why you have floquet periodicity.

Kind regards, TY

Dear Raza, From my understanding, you want a prestressed eigenfrequency solution, this is a stationary solver followed by an eigenfrequency solver. It is inbuilt in COMSOL. If you give boundary loads on both sides of the plate using a force, this will solve in the stationary study then input into the eigenfrequency solver. What are your boundary conditions? A plate 2 sides fixed and other 2 have the force applied to them? From your query it is hard to understand why you have floquet periodicity. Kind regards, TY
Rana Raza Mehdi
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 4 years ago 2020年10月5日 GMT-4 01:36

Hi sir, My plate is free from both sides (x-axis ) and I am giving load from both sides as well but it gives error because I am not giving any constraints that's why I fixed it from 1 side.

So, actually I want to simulate plate which is free from both sides and I give boundary load from both ends. Is there any boundary condition which I can apply here?

Thanks.

Hi sir, My plate is free from both sides (x-axis ) and I am giving load from both sides as well but it gives error because I am not giving any constraints that's why I fixed it from 1 side. So, actually I want to simulate plate which is free from both sides and I give boundary load from both ends. Is there any boundary condition which I can apply here? Thanks.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content