Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

saw sensor

Posted 2012年3月16日 GMT-4 12:33 Version 4.2 0 Replies

Nguyên Vinh
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello,

I has trying to simulate SAW (Surface Acoustic Wave) Delay line Device following one COMSOL conference paper (I also attach a part of that here). To make it simple, I removed the middle part between the delay line (gold square nanopillars). However, there are some things, I need help:

1/ For the voltage supply, How can I generate the impulse voltage and sinusoidal voltage as in that paper?
2/ In the paper, they measured the Insertion Loss, I do not know how to get this value.

Thanks for any help.

Attachments:

0 Replies Last Post 2012年3月16日 GMT-4 12:33
COMSOL Moderator

Hello Nguyên Vinh

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content