Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
quality factor of optical resonator in eigenfrequency study
Posted 2020年10月17日 GMT-4 21:26 0 Replies
Please login with a confirmed email address before reporting spam
Hi all,
I am working on an eigenfrequency study on a 3D optical disk resontor. My resonator is a 3-layer structure with refractive index of 3.4/3.5/3.4 from top to bottom. What I found is that when I change the surrounding environment refractive index from 1 to 1.1, the quality factor for the same mode drops a lot, like from 23000 to 6800. I was surprised at the result and suspect this is caused by some numerical defects.
I searched eigenfrequecy around 286** THz. I set the mesh size in all of the region smaller than freespace wavelength/((refractive index)5) and I think the mesh is OK. I tried both scattering boundary condition and PML, and they gave me similar results. Could any one comment on this problem or give me some advice on how to get reliable quality factor?
I will really appreciate your help. Thanks!
Hello Wenyi Zhang
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.