Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Temperature Jump Discontinuity

Posted 2012年3月19日 GMT-4 13:05 Heat Transfer & Phase Change, Microfluidics Version 4.2 2 Replies

Vivek Dhulipala
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello,

I am Vivek and am currently working on Heat Transfer in Microchannels. I would like to know how to account for the Temperature jump discontinuity in COMSOL.

Thanks !
2 Replies Last Post 2012年3月22日 GMT-4 11:57
Nagi Elabbasi Facebook Reality Labs
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2012年3月20日 GMT-4 09:00
Use a “Thin Thermally Resistive Layer” boundary condition.
Use a “Thin Thermally Resistive Layer” boundary condition.
Vivek Dhulipala
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2012年3月22日 GMT-4 11:57
Thank you,

I am not able to add boundaries to the thin thermal resistance layer. Not applicable is being shown if I select all boundaries, or the purple colour which is an indication of selection is not visible. Kindly help me regarding the same.
Thank you, I am not able to add boundaries to the thin thermal resistance layer. Not applicable is being shown if I select all boundaries, or the purple colour which is an indication of selection is not visible. Kindly help me regarding the same.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content