Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Comsol with 2 CPU instead of using GPU
Posted 2020年10月25日 GMT-4 15:12 Computational Fluid Dynamics (CFD), System Requirements Version 5.5 2 Replies
Please login with a confirmed email address before reporting spam
Hi! I am awared that comsol does not support GPU acceleration as stated before: https://www.comsol.com/forum/thread/250801/gpu-support?last=2020-02-03T13:32:52Z
However, I am planning to acquire a new PC with two Intel Xeon CPU instead of one with GPU to perform CFD simulations. My question is if I am going to be able to take full advantage of these two CPU when using Comsol or if it is not possible to do so.
What are your recomendations?
Greetings.
Please login with a confirmed email address before reporting spam
Hello Eddy,
Yes, you will. All license types can take advantage of multiple CPUs on the same machine (shared memory parallelism). Only network licenses can take advantage of clusters (distributed memory parallelism).
Best,
Jeff
-------------------Jeff Hiller
Please login with a confirmed email address before reporting spam
Hello Eddy,
Yes, you will. All license types can take advantage of multiple CPUs on the same machine (shared memory parallelism). Only network licenses can take advantage of clusters (distributed memory parallelism).
Best,
Jeff
Thank you very much Jeff :D