Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Using "Stored Solution" in another Study

Please login with a confirmed email address before reporting spam

Hi,

In my model, I have two Studies. In the first study, I Store the solution to use it as the initial condition for the 2nd Study. I was wondering if cross-Study use of "Store Solution" is valid, or it is only valid within a single Study.

Thanks,
Jessica


1 Reply Last Post 2012年3月21日 GMT-4 13:44
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2012年3月21日 GMT-4 13:44
Hi

check the tag names ans the Data set, I believe its' the Data set DB that COMSOL uses to extract the desired initial condition for any further study, as with solution, you must precise which one, and at which time or parameter value, if applicable

--
Good luck
Ivar
Hi check the tag names ans the Data set, I believe its' the Data set DB that COMSOL uses to extract the desired initial condition for any further study, as with solution, you must precise which one, and at which time or parameter value, if applicable -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.