Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
How to simulate Rotating Membrane in COMSOL?
Posted 2020年11月2日 GMT-5 06:58 Structural & Acoustics, Acoustics & Vibrations, Structural Mechanics 2 Replies
Please login with a confirmed email address before reporting spam
Hello, I wish to model a membrane (picture attached), that is mounted on a rotor at its center. Initially, there is no load except gravity, then we start rotating using the rotor. A sweep of the rotation rpm has to be done in order to evaluate its behavior. The issues that I am facing, 1. Membrane element must have tension for COMSOL to even start the simulation. There is no way I can say, the membrane has only gravity and centrifugal effects. Then, how do I perform it? Do I apply a very low value of Initial in-plane force? Or do I need to apply an initial strain, if so how much? 2. While trying to do a sweep of the Rotor rpm while making a time-dependent analysis? Thank you in advance.
Attachments:
Please login with a confirmed email address before reporting spam
Dear Paul,
Normally the pretension should be set for COMSOL membrane physics. This is unavoidable, if you know the natural frequency of your membrane, you can empirically derive the in-plane tension of your membrane.
Kind regards, TY
Please login with a confirmed email address before reporting spam
Thank you. I defined the Tension as a function of the Spatial coordinates and it seems to work.