Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Periodic boundary condition with stepping potential in Electric Current module
Posted 2012年4月6日 GMT-4 10:24 Low-Frequency Electromagnetics Version 4.2a 0 Replies
Please login with a confirmed email address before reporting spam
My model is in a 2D box with two sides in periodic condition so it is continuous in x direction. Now I wish to apply a periodic condition on the top and bottom so it is continuous as well. But instead of Vsrc=Vdst, I need them to have a potential difference such that Vsrc= Vdst+V0. In this way it can be continuous with current flow.
I cannot find a way to do that in 4.2a. Can anybody let me know if that is actually possible?
Thank you very much,
Zepu
Hello Zepu Wang
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.