Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

About defining a TE/TM mode incidental light in 3D waveguide structure

Posted 2012年4月23日 GMT-4 23:13 RF & Microwave Engineering Version 4.2a 4 Replies

Jiawei Wang
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi, everyone.

Since we know we can use a 2D cross-section of waveguide to fine the effective refractive index. Incident light at the designed port can be difined as "Rectangle" with TE/TM mode.

Here I want to do the simulation in 3D model. The type of port is "numeric" while there is no definition for the mode.

After boundary model analysis I got the field distribution in the cross-section.
I wonder whether I can define a TE/TM light to simulate in 3D model.

Thank you so much.
4 Replies Last Post 2015年10月9日 GMT-4 06:39
Alexander Kuznetsov
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2012年4月25日 GMT-4 12:27
You can use Port>User Defined to specify manually TE and TM modes
You can use Port>User Defined to specify manually TE and TM modes
Jiawei Wang
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2012年4月29日 GMT-4 05:24
About defining a TE mode in 3D waveguide sturcture

Thank you so much for your guidance.

Now I will try to use "user defined " port.
However, if I want to use a 1W TE-polarized incidental light, what should I define on INPUT QUANTITY(like the initial value of electric fields and propogation constant?)

Thanks so much.
About defining a TE mode in 3D waveguide sturcture Thank you so much for your guidance. Now I will try to use "user defined " port. However, if I want to use a 1W TE-polarized incidental light, what should I define on INPUT QUANTITY(like the initial value of electric fields and propogation constant?) Thanks so much.
Alexander Kuznetsov
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2012年4月30日 GMT-4 16:21
It's explained in "Plasmonic Wire Grating" example
It's explained in "Plasmonic Wire Grating" example
S.M. Ziauddin
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 9 years ago 2015年10月9日 GMT-4 06:39
hey,
I'm having similar problems. I'm also trying to design a 3D waveguide model. Have you found the solution yet?
hey, I'm having similar problems. I'm also trying to design a 3D waveguide model. Have you found the solution yet?

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content