Menu

Discussion Forum

New Discussion
查找

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Fluid Structure Interaction

Posted 2021年4月2日 GMT-4 09:45 2 Replies

Sahrish Naqvi
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi Dear COMSOL community

I am trying to solve one fluid-structure interaction problem, where one rigid plate (maroon color) merged in fluid, and the plate should vibrate from the right end with angular velocity given in the attached figure. I cannot apply angular velocity in the available multiphysics coupling in the Fluid-Structure module of COMSOL. I will appreciate it if anyone could help me with how I could apply this angular velocity as a boundary condition at the left end of the plate. The fluid is supposed to be stationary.

Attachments:

2 Replies Last Post 2021年4月2日 GMT-4 12:00
Jeff Hiller COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 4 years ago 2021年4月2日 GMT-4 10:46
Updated: 4 years ago 2021年4月2日 GMT-4 12:08

Hello Sahrish,

If the plate is rigid and you only care about how its oscillations induce flow, you can use the Deformed Mesh Interface. The angular rotation in your case looks like it's going to be relatively small, but this blog post should still be useful to you. This one is closely related to your interest, and a fun read too. You will probably also enjoy this other blog post on modeling fish swimming, especially if you may at some point be interested in looking at the stresses inside the plate.

Best,

Jeff

-------------------
Jeff Hiller
Hello Sahrish, If the plate is rigid and you only care about how its oscillations induce flow, you can use the Deformed Mesh Interface. The angular rotation in your case looks like it's going to be relatively small, but [this blog post](https://www.comsol.com/blogs/deformed-mesh-interfaces-rotations-and-linear-translations/) should still be useful to you. [This one](https://www.comsol.com/blogs/how-to-improve-your-paddle-stroke-with-simulation/) is closely related to your interest, and a fun read too. You will probably also enjoy [this other blog post](https://www.comsol.com/blogs/studying-the-swimming-patterns-of-fish-with-simulation/) on modeling fish swimming, especially if you may at some point be interested in looking at the stresses inside the plate. Best, Jeff
Sahrish Naqvi
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 4 years ago 2021年4月2日 GMT-4 12:00

Hello Sahrish,

If the plate is rigid and you only care about how its oscillations induce flow, you can use the Deformed Mesh Interface. The angular rotation in your case looks like it's going to be relatively small, but this blog post should still be useful to you. [This one] is closely related to your interest, and a fun read too. You will probably also enjoy this other blog post on modeling fish swimming, especially if you may at some point be interested in looking at the stresses inside the plate.

Best,

Jeff

Dear Jeff

Thank you so much for your response. Let me check the blog post, i hope I will come up with something. Will get back to you.

Sahrish

>Hello Sahrish, > >If the plate is rigid and you only care about how its oscillations induce flow, you can use the Deformed Mesh Interface. The angular rotation in your case looks like it's going to be relatively small, but [this blog post](https://www.comsol.com/blogs/deformed-mesh-interfaces-rotations-and-linear-translations/) should still be useful to you. [This one] is closely related to your interest, and a fun read too. You will probably also enjoy [this other blog post](https://www.comsol.com/blogs/studying-the-swimming-patterns-of-fish-with-simulation/) on modeling fish swimming, especially if you may at some point be interested in looking at the stresses inside the plate. > >Best, > >Jeff Dear Jeff Thank you so much for your response. Let me check the blog post, i hope I will come up with something. Will get back to you. Sahrish

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content