Menu

Discussion Forum

New Discussion
查找

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

3D ring resonator

Posted 2021年4月13日 GMT-4 06:23 2 Replies

Arghadeep Pal
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hey,

I need some suggestions to make a 3D ring resonator. I have 80Gb of ram still my resolutions are not good. What should I do?

2 Replies Last Post 2021年4月13日 GMT-4 13:19
Robert Koslover Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 4 years ago 2021年4月13日 GMT-4 13:15
Updated: 4 years ago 2021年4月13日 GMT-4 13:22

Your question does not provide much information. But if you are looking for ways to reduce computational size or otherwise handle large models, see (among others): https://www.comsol.com/support/knowledgebase/1267 and https://www.comsol.com/support/knowledgebase/830 and https://www.comsol.com/support/knowledgebase/1038

-------------------
Scientific Applications & Research Associates (SARA) Inc.
www.comsol.com/partners-consultants/certified-consultants/sara
Your question does not provide much information. But if you are looking for ways to reduce computational size or otherwise handle large models, see (among others): https://www.comsol.com/support/knowledgebase/1267 and https://www.comsol.com/support/knowledgebase/830 and https://www.comsol.com/support/knowledgebase/1038
Robert Koslover Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 4 years ago 2021年4月13日 GMT-4 13:19

It is difficult to guess where your problem is occurring, based on your question. You can find general information about solving computationally-large models in the Knowledge Base. If you have a specific model-related issue, I suggest you post your model to the forum.

-------------------
Scientific Applications & Research Associates (SARA) Inc.
www.comsol.com/partners-consultants/certified-consultants/sara
It is difficult to guess where your problem is occurring, based on your question. You can find general information about solving computationally-large models in the Knowledge Base. If you have a specific model-related issue, I suggest you post your model to the forum.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content