Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Water steam condensation on outer tube
Posted 2012年5月24日 GMT-4 04:51 Heat Transfer & Phase Change, Modeling Tools & Definitions, Parameters, Variables, & Functions Version 4.2a, Version 4.4 1 Reply
Please login with a confirmed email address before reporting spam
I would like to simulate the heat transfer coefficient of water-steam condensation on the outer tube surface. But i do not now how it works in COMSOL. Maybe somebody could help me with my problem.
I would like to know how i can simulate the condensation of water on the tube. Inside the tube a cooling fluid is flowing.
Maybe somebody could helo me with my problem.
Thanks to all!
Alex
Hello
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.
Please login with a confirmed email address before reporting spam
I would also like to simulate condensation of water on outer tube surface with a cold fluid flowing inside the tube.
It would be very helpful if you can share the information on how you simulated this in COMSOL.
Thanks !!
Manideep