Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Construct Mesh
Posted 2012年6月3日 GMT-4 16:59 Fluid & Heat, Heat Transfer & Phase Change, Computational Fluid Dynamics (CFD) Version 4.2a 1 Reply
Please login with a confirmed email address before reporting spam
Dear All,
I am trying to simulate the heat transfer in fluid (Exhaust Manifold), to see how hot exhaust gases comes in the tube and lead out by decreasing temperature.
For this phenomenon, I need to construct Mesh so the process will follow step by step.
Please if someone can help me, it will be greatfull !
Thanks
--
A. Fopah Lele
I am trying to simulate the heat transfer in fluid (Exhaust Manifold), to see how hot exhaust gases comes in the tube and lead out by decreasing temperature.
For this phenomenon, I need to construct Mesh so the process will follow step by step.
Please if someone can help me, it will be greatfull !
Thanks
--
A. Fopah Lele
1 Reply Last Post 2012年6月4日 GMT-4 01:43
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
mostly I notice that for simple (and sometimes complex) geometries COMSOl default mesh is quite OK.
But be aware that in CFD you need quite a lot of RAM as the mesh density is high to resolve the phenomena.
--
Good luck
Ivar
mostly I notice that for simple (and sometimes complex) geometries COMSOl default mesh is quite OK.
But be aware that in CFD you need quite a lot of RAM as the mesh density is high to resolve the phenomena.
--
Good luck
Ivar