Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

parametric sweep

Posted 2012年6月10日 GMT-4 01:44 Version 4.2 0 Replies

Selim Habib
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi,
I have designed a pcf of 5 rings of air holes having pitch = 1 um, d = .9 um.
I faced problem using parametric sweep. i sweep the wavelength from 1 to 1.7 um. For
all the wavelengths the mode field is not confined. what is reason behind it.

what is contribution of meshing.
I used meshing coarser .
0 Replies Last Post 2012年6月10日 GMT-4 01:44
COMSOL Moderator

Hello Selim Habib

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content