Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

import autocad 3d model

Posted 2012年6月12日 GMT-4 10:54 Interfacing, Geometry Version 3.5a 1 Reply

Alex Papad
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

hi all!

I would like to ask if i can import an autocad 3d model in comsol 3.5a. i use autocad2013. i want to make a screw 3d model like the one i attach and which i have made in autocad. but i just find it a bit hard to do that in comsol. could anyone help please?Thanks in advance.

Best regards
Alex

Attachments:

1 Reply Last Post 2012年6月12日 GMT-4 15:45
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2012年6月12日 GMT-4 15:45
Hi

heck the 3.5 doc about geoemtry file formats, I cannot remember if COMSOl reads directly Autocad *d or of you need to convert it to step or another format, it depends also on which CAD module you have

--
Good luck
Ivar
Hi heck the 3.5 doc about geoemtry file formats, I cannot remember if COMSOl reads directly Autocad *d or of you need to convert it to step or another format, it depends also on which CAD module you have -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content