Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Failed to respect boundary at zylinder
Posted 2012年6月13日 GMT-4 09:38 Low-Frequency Electromagnetics, Mesh Version 4.2a 1 Reply
Please login with a confirmed email address before reporting spam
hello,
i'm working at the moment on a simple combination of coils using a mesh combinated with tetras and quads.
as you can see in my file i would like to mesh the zylinder with quads and the outer volume with tetras.
but i can't get outer volume meshed.
i've tried several different combinations of min max elementsize configs.
i've also tried to ad a second zylinder -> still the same error
"Failed to respect boundary element edge on geometry face."
it's really frustrating to mesh with comsol... i've already mesh complex parts like automobile headlites, wind turbines, mountains for meteorological cfd simulations and much more (with ANSA from BETA CAE)
and now for my bachelor i have to use comsol and can't even mesh this simple geometry.
i hope you can help me.
best regards
i'm working at the moment on a simple combination of coils using a mesh combinated with tetras and quads.
as you can see in my file i would like to mesh the zylinder with quads and the outer volume with tetras.
but i can't get outer volume meshed.
i've tried several different combinations of min max elementsize configs.
i've also tried to ad a second zylinder -> still the same error
"Failed to respect boundary element edge on geometry face."
it's really frustrating to mesh with comsol... i've already mesh complex parts like automobile headlites, wind turbines, mountains for meteorological cfd simulations and much more (with ANSA from BETA CAE)
and now for my bachelor i have to use comsol and can't even mesh this simple geometry.
i hope you can help me.
best regards
Attachments:
1 Reply Last Post 2012年6月20日 GMT-4 05:43
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
i've tried now to "help" comsol to add additional volumes.
using "extremely fine" for the first additional voulme ist working but only partial.
does anybody have an idea what i could try?
using "extremely fine" for the first additional voulme ist working but only partial.
does anybody have an idea what i could try?
Attachments: